Geo-hydromechs (india)


EnglishFrenchGermanItalianPortugueseSpanish


Water Current Meter


Water Current Meter


We are one of the trusted names in the Indian Market, when it comes to reliable Water Current Meter Manufacturers, Suppliers and Exporters. We offer highly accurate Water Current Meter which measures the current and velocity of the flowing water in open channels. Available in different variants, the Water Current Meter provided by us has been termed as the best available weather instrument in the market.

Why our Water Current Meter?

  • Made from wear resistant spares
  • Technologically advanced nature
  • Unique construction
  • Highly accurate measurement
  • Tested for quality and performance


Variants :

  • Cup Type
  • Miniature Type
  • Propeller Type


Use : For determining velocities of flowing water in open channels and streams



Water Current Meter (Cup Type)

Water Current Meter (Cup Type)
We are proud to offer superior Water Current Meter (Cup Type), which are used for determining velocity of flowing water in open channels and streams. Made in compliance with I.S.3910, our Water Current Meter (Cup Type) is able to cater to any and every water current measurement need of our clients.

Construction and Working :
  • Consist of six cup assembly mounted on a vertical shaft
  • This shaft is held vertical in a yoke frame on two pivot points.
  • Yoke frame while holding the moving assembly protect its cups from damage from the Floating bodies in flowing water
  • The vertical shaft rests on a pivot point at the lower end, which is adjustable
  • The upper end of the shaft is held in at a pivot position inside the magnetic contact Chamber, which is made water tight by a cap.
  • The magnetic contact chamber is equipped with Two contact switches the terminals of which are located outside on the body of the contact chamber.
  • Only one switch is used at a time, the other is a spare and stands by switch and can be used immediately, if one goes out of order.
  • The other end of the contact terminal (earth) is the yoke frame itself and so a common earth terminal has been provided on the yoke frame.
  • The bucket wheel rotates in between two pivots in the yoke frame.
  • Each revolution of the bucket wheel makes a contact of the magnetic switch in the magnetic chamber which can be recorded on a counter
  • The yoke frame consists of a tail fin with a balance weight, which moves in a slot and can be adjusted at any place within slot.
  • The balancing weight is so adjusted so as to keep the current meter horizontal when suspended in water
  • The tail fin keeps the yoke frame with the bucket wheel to the upstream direction as the tail fin goes to downstream direction with the flow of water
  • The meter is suspended in water with the help of a suspension flat in deep water, and by a suspension wading rod in shallow water.


Water Current Meter (Miniature Type)

Water Current Meter (Miniature Type)
We are listed among the trusted sources of Water Current Meter (Miniature Type) in India and abroad. Our Water Current Meter (Miniature Type) is very popular among our clients because of the accuracy with which it measures the velocity of the flowing water. It is fabricated in accordance with IS 3910 â 1966.

Construction and Working :
  • It is suspended in the water using a cable with sinking weight or wading rod
  • It accurately measure stream flow velocities from 0.01 to 3.5 meters per second with Multiple propellers.
  • Magnetic current meter has a permanent magnet mounted on its shaft.
  • In every revolution of the cup wheel the magnet actuates the proximity resulting in one make and break of the contacts
  • The free ends of the proximity switch cable are connected to an automatic counter, which registers one count for every revolution of the wheel.
  • The calibration chart provided with the meter gives the velocity in m/sec.


Water Current Meter (Propeller Type)

Water Current Meter (Propeller Type)
The technologically advanced Water Current Meter (Propeller Type) offered by us is ideal for the measurement of velocity of flow of water in open channels and streams. Fabricated in compliance with IS 3910, our Water Current Meter (Propeller Type) has been termed as the best available in the market.

Construction and Working :
  • Consist of six cup assembly mounted on a vertical shaft
  • This shaft is held vertical in a yoke frame on two pivot points.
  • Yoke frame while holding the moving assembly protect its cups from damage from the Floating bodies in flowing water
  • The vertical shaft rests on a pivot point at the lower end, which is adjustable
  • The upper end of the shaft is held in at a pivot position inside the magnetic contact Chamber, which is made water tight by a cap.
  • The magnetic contact chamber is equipped with Two contact switches the terminals of which are located outside on the body of the contact chamber.
  • Only one switch is used at a time, the other is a spare and stands by switch and can be used immediately, if one goes out of order.
  • The other end of the contact terminal (earth) is the yoke frame itself and so a common earth terminal has been provided on the yoke frame.
  • The bucket wheel rotates in between two pivots in the yoke frame.
  • Each revolution of the bucket wheel makes a contact of the magnetic switch in the magnetic chamber which can be recorded on a counter
  • The yoke frame consists of a tail fin with a balance weight, which moves in a slot and can be adjusted at any place within slot.
  • The balancing weight is so adjusted so as to keep the current meter horizontal when suspended in water
  • The tail fin keeps the yoke frame with the bucket wheel to the upstream direction as the tail fin goes to downstream direction with the flow of water
  • The meter is suspended in water with the help of a suspension flat in deep water, and by a suspension wading rod in shallow water.